Duty Belt – What's Important to Have?

I spare no expense in making sure my duty belt contains the best equipment allowed by my agency’s policy. I work in an unforgiving environment where calling a ‘time out’ isn’t an option. It’s not uncommon for policies to be out of date, or to mandate equipment purchased by the agency, or to reflect the manufacturer’s recommendations. Policies can be restrictive but it’s generally to ensure consistency in the function and performance of the equipment and to achieve uniformity among officers. There are three pieces of equipment that matter more to me than anything else on my belt: my firearm, my holster and magazine pouch and my knife.

The most important piece of equipment on any police officer’s duty belt is the one piece they will hopefully never have to use, their firearm. Years ago, our policy changed for the better. It allowed officers to purchase and carry 40-caliber Glock firearm models. I, like most of my coworkers, purchased the Glock because it was a huge improvement from the outdated Smith & Wesson 4046s that we were carrying at that time. Once the lifespan of the model 4046 firearms came to an end, our department purchased the M&P. I think they purchased the M&P in order to give officers an additional option. The M&P is similar in many ways to the Glock and since it was free, I had one issued to me. I really liked the M&P when I shot it but there was one difference I noted between the two guns … the reset. The trigger reset in the M&P is not as distinct as the Glock. Having mastered the reset on the Glock, I prefer it. There is a fix for the Smith & Wesson trigger, that mimics the Glock, but our policy doesn’t allow us to make internal modifications to duty firearms.

Apex Tactical developed a drop in trigger assembly, that is a significant improvement to the Smith & Wesson factory trigger. It is easy to install and the outcome is a trigger break point, that is farther forward than the factory trigger, as well as reduced uptake and over-travel. I have tested out the Apex and absolutely love the Smith & Wesson M&P with the Apex trigger assembly. I cannot install the Apex trigger by policy so I continue to carry my Glock 35. An officer really has to be comfortable with their firearm and the M&P trigger is a deal breaker for me.

Holster selection: the three r’s (ride, retention and reputation)

Holster selection is critical in keeping an officer’s firearm out of the hands of would be aggressors. Many police agencies dictate holster selections for a variety of reasons. I could have a huge discussion over the criteria to consider before selecting a holster. Essentially, holster selection comes down to a couple of things: ride, retention and manufacturer reputation. I have bounced around in all three of those areas trying various holsters, and have spent a fortune while doing so.

In general, a low-ride holster is the best selection for female officers, since it allows them to draw appropriately without having to cant their bodies to clear leather. Unfortunately, low-ride holsters can sometimes cause discomfort in the leg and hip area when seated in a squad car, especially if you have a large firearm. Retention options in a holster require balancing the ease of its use with the level of security it offers. Understand that the more secure a firearm, the more complicated the draw. Retention levels are designed to keep criminals from disarming police officers, but for an untrained officer under stress, complicated retention systems can also prevent them from drawing their own firearm when needed. The demands of law enforcement require a holster that can withstand the stress generated by both the environment and human beings. A manufacturer’s reputation of reliability provides peace of mind to police officers.

Based on these considerations, I carry a Safariland model 6360 level III retention ALSÒ holster. In addition, I carry Safariland’s Slimline three magazine pouch, which houses three magazines positioned, ‘face out.’ The orientation of the magazines saves valuable real estate on an already cramped belt. Even with space limitations, I find room to carry a knife. It’s not mandatory to carry a knife but it could be essential.

Plan B – the knife

Several years ago during a ground fighting/weapon retention training session I discovered that if I am lying on my holster, I am unable to flip the hood. This was an epiphany for me as I tried to kick off the 6’4”, 225 lb roll-player. I recognized the need for a backup weapon in case I couldn’t un-holster my firearm. I opted against a second firearm and finally concluded that I should also carry a knife. Carrying a knife became my ‘Plan B’ deadly force option … just in case I can’t get to my gun. I have purchased no less than twenty knives since then, until I finally found a knife that was easy to carry and deploy.

The Kershaw Ripcord 3200 is an ‘Out the Front’ knife that has the strength of a fixed blade knife, yet is concealable.

The Kershaw Ripcord 3200 is the perfect knife for carrying on my duty belt. The Ripcord has an Out the Front (OTF) design, which means the blade slides out of the front of its handle into a secure, fixed-blade position. The Ripcord comes with a Kydex® belt sheath, which doubles as the OTF deployment/blade-locking system. The Kershaw Ripcord doesn’t look like a knife when it is placed in its sheath on a belt. Only upon deploying it do onlookers recognize it and by then, hopefully, it’ll be too late.

To open the Ripcord:

Grasp the handle and pull up
As the knife reaches the end of its travel, tilt it slightly forward to disengage the blade-locking stud from the beveled circular recess
In the fixed position, the Ripcord’s blade is secure and cannot be retracted without the sheath.

To return the Ripcord to the sheath:

Insert the tip of the knife into the Kydex® sheath and lower the blade into the sheath until the beveled circular recess in the knife lines up with the stud
Tilt the knife toward the stud to engage the mechanism and slide the Ripcord into its sheath
The blade clicks securely into place, enabling your to carry the Ripcord tip-up or tip-down.
The blade offers strength and superior edge retention, and the handle is constructed of a lightweight, anodized aluminum with Trac-TecÒ inserts for a secure grip.

My equipment selections are based on both policy and performance. I never hesitate to replace any equipment for better options. This is especially true when it comes to my firearm, holster and knife. I constantly search for product improvements because I know that winning or losing a confrontation may just hinge on the equipment I’ve selected.

Source:Sarah – Women Outdoor News

Add a Comment

Your email address will not be published. Required fields are marked *